1. Extruder: 1 set
(1) Screw diameter: 90mm, Rotation speed of screw: 0～80 rpm. Screw: Zhoushan.
(2) L:D: 30:1, Material of screw: 38CrMoALA , The screw is suitable for PA6 chips.
(3) Pressure automatic feedback system which can adjust the screw speed automatically.
(4) Material of barrel heater: Infarad
(5) Metering pump, rotation speed: 0-45 rpm.
(6) Electrical heating spinneret: 1 set.
(7) Two color doer: 1 set
3. Quenching tank: 1 set
(1) The tank is made by SS 304.
(2) Equip one suction device under the yarn support plate.
4. Seven roller stretching unit A
(1) Seven variable diameter rollers made by steel pipe with hard chrome plating.
(2) Steel box with accurately grind gear makes the rollers run smoothly.
(3) Built-out oil lubrication system which makes the gears runs steady.
(4) Equip 1 pressing roller.
5. Overflow water tank: 1 set
(1) Tank size: 4000mm
(2) Electric heating pipe is in the tank.
(3) The tank is made by SS 304 with insulating layer.
(4) Water removal device: 2 sets with suction.
(5) Water circulating pump 1.1kw
6. Seven roller stretching unit B
(1) Seven variable diameter rollers made by steel pipe.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(3) Built-in oil lubrication system which makes the gears runs steady. Bearings: TIMKEN-TWB.
(4) Equip 1 pressing roller.
7. Double layers hot blast stretching oven: 1 set
(1) Oven length: 4300 mm
(2) Heating power 23kw×2
(3) Special design of hot air channel which make the temperature evenly.
8. Seven roller stretching unit C
(1) Seven variable diameter rollers made by steel pipe with hard chrome plating.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(3) Built-in oil lubrication system which makes the gears runs steady.
(4) Equip 1 pressing roller.
9. Double layers hot blast stretching oven: 2 sets
(1) Oven length: 4000 mm
(2) Heating power 23kw×2
(3) Special design of hot air channel which make the temperature evenly.
10. Seven roller stretching unit D.
(1) Seven variable diameter rollers made by steel pipe with hard chrome plating.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(4) Built-in oil lubrication system which makes the gears runs steady.
11. Lubricating system: 1 set
(1) Frequency control of speed
(2) Material: All made by SS 304
12. Spindle winder: 24 spindles
(1) Spool as client's request.
(2) The frame transmission is frequency control, driving motor: 2.2kw
(3) The tension controlled by inverter.
13. Waster yarn collectors: 1 set
(1) Torque motor power: 80KG.cm
14. Total installation power: 320KW
Specification:
| Screw diameter | Φ-90mm |
| Raw material | PA6 | Filament size | 1-3mm |
| Capacity | 80Kg/H | Filament shape | round |
| Screw L:D | 30:1 | Stretching unit | 4 sets |
| Screw material | 38CrMoALA | Winder | 24 spindles |
| Max linear speed | 150m/min | Instillation power | 320Kw |
| Nozzle holes | 20 holes | Overall size | 42×2.5×2.5m |
Picture:
